Install NetBSD system on SD card

 

Installing NetBSD on Arm architecture. To begin with, you need to download from the official website of the NetBSD operating system, the image intended for Arm architecture at any convenient place for you. Then opening the console to the Number of the following command:

 

dd if=armv7.img of=/dev/da4 bs=1m conv=sync

 

To display the process at the end, you can add the following:

 

status=progress

 

To write a U-Boot on an SD card, first set either a binary package or the U-boot port under your fee. Use the search to find the desired U-boot, and then install that is:

 

pkgin Install '' U-Boot ''

 

Then, to record the U-Boot on the SD card, execute the command according to the following example.

This is an example for Allwinner SOC

 

dd if =/usr/pkg/share/u-boot/u-boot-sunxi-with-spl.bin/u-boot-sunxi-with-spl.bin of=/dev/da4 bs=1k seek=8 conv=sync

 

All is ready! Now you can insert an SD card into your computer and download the ROOT password system is not default. To transfer an EMMC internal memory system, use the manual described above or use the sysinst utility.

Next Post
Last Post